Antenna one

Table 1. Product Specifications Description Specification Standards • IEEE 802.11n, 802.11g, 802.11b, • 802.3, 802.3u • 802.1X (security authentication) • 802.1Q (VLAN) • 802.11i (Wi-Fi Protected Access [WPA2] security) • 802.11e (wireless quality of service [QoS]) • IPv4 (RFC 791), IPv6 (RFC 2460) • Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723) Network protocols • Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent • Static IP • Point-to-Point Protocol over Ethernet (PPPoE) • Point-to-Point Tunneling Protocol (PPTP) • Layer 2 Tunneling Protocol (L2TP) • Spanning Tree Protocol (STP) • Dynamic DNS (DDNS) (DynDNS, TZO) Routing protocols • Static • RIP v1, v2 NAT protocol • Port Address Translation (PAT) • Network Address Port Translation (NAPT), NAT traversal, one-to-one NAT • Session Initiation Protocol Application Layer Gateway (SIP ALG) IPv6 • Dual-stack IPv4 and IPv6 • 6-to-4 • Stateless address auto-configuration • DHCP v6 • Internet Control Message Protocol (ICMP) v6 Network edge (DMZ) Software configurable on any IP address VLAN support Port-based and 802.1q tag-based VLANs, inter-VLAN routing Number of VLANs 16 active VLANs (1-4096 range) Security Firewall Stateful packet inspection (SPI) firewall, firewall rules Access control MAC-based access control, IP/MAC binding, wireless profiles Content filtering Static URL blocking, keyword blocking, approved URL Secure management HTTPS, username/password, X.509 v3 certificates 802.1x supplicant Port-based RADIUS authentication (Extensible Authentication Protocol [EAP] MD5, Protected EAP [PEAP]) Certificates X.509 v3 certificates, certificate upload using PEM format VPN IPsec 25 IPsec site-to-site tunnels QuickVPN 25 QuickVPN tunnels for remote client access SSL VPN 5 SSL VPN tunnels SSL VPN platforms Microsoft Windows 2000/XP/Vista 32 and 64-bit/Windows 7; Mac OSX 10.4+ PPTP 10 PPTP tunnels for remote access Encryption Data Encryption Standard (DES), Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption (128, 192, 256-bit) Authentication MD5/SHA1 authentication VPN pass-through PPTP, L2TP, IPsec Advanced VPN Dead Peer Detection (DPD), IPsec NAT traversal, Group VPN Quality of Service Prioritization types 802.1p port-based priority on LAN port, application-based priority on WAN port Queues 4 queues Performance NAT throughput 800 Mbps Concurrent sessions 6000 IPsec VPN throughput (3DES / AES) 90 Mbps SSL VPN throughput 25 Mbps Configuration Web user interface Simple browser-based device manager (HTTP/HTTPS) Management Management protocols Web browser, Simple Network Management Protocol (SNMP) version 1, 2c, 3, Bonjour, Universal Plug and Play (UPnP), Simple Network Time Protocol (SNTP) Event logging Local, syslog, email alerts, packet captures Upgradability Firmware upgradable through web browser, imported/exported configuration in text format Wireless LAN Specification Table 2 lists the wireless specifications for the Cisco RV220W. Table 2. Wireless Specifications Description Specification Product Dimensions (W x H x D) 8.66" x 1.54" x 6.69" 220 mm x 39 mm x 170 mm Ports 1 x 10/100/1000 Mbps Gigabit Ethernet WAN 4 x 10/100/1000 Mbps Gigabit Ethernet LAN Power Spec/modulation • 802.11 b/g/a/n • Binary phase-shift keying (BPSK) • Quadrature phase-shift keying (QPSK), • Quadrature amplitude modulation (QAM): 16-QAM, 64-QAM Channels FCC: • 2.4 GHz: channels 1-11 • 5.15 - 5.25 GHz: channels 36, 40, 44, 48 • 5.725 - 5.825 GHz: channels 149, 153, 157, 161, 165 Channel selection Auto channel selection External antennas Two detachable antennae with reverse SMA connectors Internal antenna One fixed internal antenna Antenna gain in dBi Two omni-directional antennae with maximum 2 dBi gain One directional internal antenna with maximum 6.6 dBi gain Transmit power • 802.11b: 17.5 dBm +/- 1.5 dBm • 802.11g: 17.5 dBm +/- 1.5 dBm • 802.11a: 13.5 dBm +/- 1.5 dBm • 802.11n: 13.5 dBm +/- 1.5 dBm Receiver sensitivity • 802.11b: -90 dBm 11 Mbps • 802.11g: -74 dBm 54 Mbps • 802.11a: -71 dBm 54 Mbps • 802.11n: -66 dBm 270 Mbps (2.4 GHz) • 802.11n: -63 dBm 270 Mbps (5 GHz) Multiple SSIDs Supports multiple SSIDs, up to 4 separate virtual networks with separate wireless profiles Wireless VLAN map Supports SSID to VLAN mapping with wireless client isolation WMM Wireless multimedia with QoS (802.1e) U-APSD Wi-Fi Multimedia (WMM) power save Wireless Distribution System (WDS) Allows wireless signals to be repeated by up to 4 compatible repeaters System Specifications Table 3 lists the system specifications for the Cisco RV220W. Table 3. System Specifications Description Specification Power 12V 1A Certification FCC class B, IC Operating temperature 0º to 40ºC (32º to 104ºF) Storage temperature -20º to 70ºC (-4º to 158ºF) Operating humidity 10% to 85% noncondensing Storage humidity 5% to 90% noncondensing

Access Point Model: SMC2891W-AG Novo Tenho cabo de para ligar a rede SMC Master Wireless Access Point/Bridge - PoE kit included SMC Master Wireless Access Point/Bridge - PoE kit included Overview The EliteConnect™ 802.11a/g Wireless Outdoor Access Point/Bridge is designed to bridge two or more wired LAN’s (usually located in different buildings), while simultaneously providing wireless access to local or mobile users. The SMC2890W-AG/SMC2891W-AG incorporates a dual radio architecture to bridge over one wireless band and provide wireless client access over the other band. The Dual-Band Outdoor Access Point/Bridge is completely weatherproof and capable of being installed in a wide variety of different environments. It comes in two models, SMC2890W-AG and SMC2891W-AG, the latter with built-in 17dBi 5GHz antenna and uses Wireless Distribution System (WDS) to allow bridging between remote locations. Up to 6 WDS Bridge links are supported to remote LAN’s and branch locations. Using dual radio architecture allows for different bridging options using either the 802.11a or 802.11b/g wireless band. As an alternative if the bridging functionality is not required you can use both 802.11a and 802.11b/g in access point mode. Security is the main concern for customers regarding enterprise wireless networking. The EliteConnect' Universal 2.4GHz/5Ghz Outdoor Access Point/Bridge provides enterprise level advanced authentication and encryption security features. Security features include 64/128/152-bit WEP, or 128-bit Advanced Encryption Standard (AES), Wi-Fi Protected Access (WPA/WPA2) and authentication using 802.1x. SMC2890W-AG / SMC2891W-AG also supports disable SSID Broadcast, Client Isolation, and MAC filtering. SMC2890W-AG / SMC2891W-AG allows easy management options through HTTP, SNMP, and Telnet. Web based network management tools make configuration and remote management of the network simple. SNMP allows for easy integration into your existing wired network and management infrastructure. Telnet uses command line interface for local or remote management. Other management features include Syslog and local Event Logging. The Dual-Band Outdoor Bridge comes with available antenna connections to add optional SMC high gain antennas to extend your wireless coverage and range. The SMC2890W-AG has the option for both 802.11a and 802.11g high gain antenna options. The SMC2891W-AG has a 17dBi built-in 802.11a flat panel antenna and optional 802.11g antenna. SMC's line of high gain antennas offers the flexibility and reliability that customers require. Other key Enterprise level features include Spanning-Tree support anda RSSI (Received Signal Strength Indicator). Spanning Tree can be used to detect and prevent network loops in your Wireless LAN. This ensures only one route exists between any two points on a network and can allow for Redundancy in case one link goes down. RSSI is built into the web interface allowing a user to view the Signal to Noise ratio between two bridge links, thus enabling better antenna alignment and link monitoring. Specifications Network Configuration • Bridge Mode: Point-to-Point, Point-to-Multipoint, Wireless Distribution System (WDS) • Access Point Mode: Infrastructure Mode Maximum Clients • 128 in Access Point Mode (64 per radio interface) Physical Ports • SMC2890W-AG • 1-port 10/100Mbps Fast Ethernet with support for Power over Ethernet (PoE) • 1-port Management Console • 2x N-type antenna connector, 2.4GHz for 802.11b/g • 2x N-type antenna connector, 5GHz for 802.11a • SMC2891W-AG • 1-port 10/100Mbps Fast Ethernet with support for Power over Ethernet (PoE) • 1-port Management Console • 2x N-type antenna connector, 2.4GHz for 802.11b/g • 1x N-type antenna connector, 5GHz for 802.11a LED Indicators • PWR (Power), Link (Ethernet Link/Activity), 11a and 11g (Wireless Link/Activity) • Built-in RSSI Meter (Receive Signal Strength Indicator) Additional Package Content • 98 ft/ 30 m LAN/PoE cable with RJ-45 and special outdoor connector • 5.9 ft/ 1.8 m console cable with RS-232 and special outdoor connector

Modulo GSM Depois de colocar um cartao SIM funciona como um telefone para ligar ao alarme de casa. Dispositivos de telefonia analógica normais (por exemplo, equipamento sem fio ou de mesa para telefone / FXO / PBX / VoIP, etc.) podem ser conectados a este gateway GSM. Todas as chamadas ou comunicações serão acessadas e transmitidas via rede GSM em vez dos tradicionais fios telefônicos. Features: 1. Multicolor backlight display (green) 2. Can dial the local calls, mobile calls, international calls and special free calls 3. Supports modem mode 4. No need to dial area code when calling local numbers 5. Automatically connects to IP network when dialing long distance(optional) 6. Automatic card-locking and netwok -locking enable 7. Caller ID display, time and date display, the power supply of battery can display at the same time on the LCD. 8. Cost rate setting enable Specifications: 1. Networks support: GSM900/1800MHz 2. Voltage: DC 9V /DC12V 3. Stand by hours: 48 Hours 4. Talk time: 2-6 Hours 5. Charging time: 6 hours 6. Power consumption: Static ≤ 25MA emission ≤ 500MA 7. Peak power consumption: 0. 25W/0. 5W 8. Receive sensitivity: -104db 9. Antenna increment: All directions: 5. 0db; Certain/Selection: 12db Connect the terminal: Connecting Your Service Provider To use the networks services available in you terminal, you will need to sign up with wirelesses. provider and purchase a SIM (Subscriber Identity Module) Card or purchase a prepaid SIM card. In many cases, the wireless provider will make available descriptions of its services and instructions for using its features. Wireless provider may differ in their support of features. Before you sigh up, make sure a wireless provider support the features that you need. Installing the Antenna To choose a proper place for the antenna is the first and very important step for antenna installing. You can use your mobile phone to search for the place where the strongest signal is. Then put the antenna here. Please do not make the antenna too close to the terminal. It will disturb the signal of the terminal. Please do not make the antenna and the terminal too close to the TV set, computer, and radiogram. It will disturb the signal of the terminal. Inserting a SIM Card Make sure the terminal is switched off and the AC adapter is unplugged: insert the SIM card only when the terminal is switched off and the AC adapter is unplugged. Follow the instructions below to insert a SIM Card into the terminal. 1). Screw off the screw of SIM card case, and open the cover. 2). Slide back the SIM card door and lift it up. 3). Slide the SIM card into the SIM door making sure that the clipped corner of the SIM card lines up with the clipped corner of the SIM holder. 4). Close the SIM card door and slide it to lock the SIM card in place. 5). Replace the cover of SIM card case and fixes it with a screw. Connecting your terminal with desktop phone If you want to use the terminal to make calls, you should connect the terminal with a common wired desktop phone. There is one or two communication portals at the back of the terminal. You can connect one desktop phone and billing machine (optional) with our terminal. It’s very easy to connect the phone and terminal, just need a common communication cable. Motivo da Venda: sem uso Entrega em mão na zona de Braga

MTecnologia Somos Profissionais Preço com IVA incluído (*) Envio em CTT registado acresce 3,60 - Pagamento MB, TB ou Paypal (*) Envio em CTT à cobrança acresce 5,65€ - Entrega em +/-4 dias (habitualmente em stock) * custo para envio de 1 unidade - outras quantidades contactar"" - Possibilidade de entrega em mãos no nosso pick-up Point em Vizela (dias úteis 9:00-13:00 e 15:00-19:00) - Outros horários ou modalidades de envio pf contactar. - Também entregamos em mãos por encontro combinado ao final do dia ao longo de: ++++ EN105 entre Vizela e Maia (Vizela / Vila das Aves / Santo Tirso / Maia) ++++ EN14 entre Trofa e Maia ++++ A41/A42 Lousada, Paços de Ferreira e Maia ++++ A3 e A7 entre Portagens da Maia, Vila Nova de Famalicão e Riba de Ave - Para incluir NIF na factura, por favor informe - Mais produtos na nossa loja online. Contacte para ficar a conhecer. ------- Sistema Relé de 4 canais operado via GSM por SMS permite accionar até 4 cargas a partir de qualquer ponto do mundo. Com este sistema num edifício pode controlar até 4 portões. GSM SMS Controller Switch CL4-GSM Sensor Wireless Remote w/ Aluminum Alloy Box Features: 1. Easy to operate by one call or SMS 2. Aluminum alloy case with fire retardant plastic to prevent fire 3. Up to 5 different mobile phone numbers can be pre-set in the system 4. Secure - Using caller ID for identification, unknown callers are ignored 5. No need to provide a remote control for different users 6. Can be operated from anywhere, no distance limit 7. Can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems 8. Great for control of home electrical devices such as servicer, lamp, computer, refrigerator, TV, wireless router and so on Specifications: Size:155x55x32mm Work frequency: 850 / 900 / 1800 / 1900MHz Input voltage: DC 9-12V Input power: 0.9W Output current: 10A Output voltage: 220V/10A, 125V/30V/15A Max. output power: 2200W Case material: Aluminum Alloy Package content: 1 x GSM Controller 1 x GSM Antenna 1 x Adapter 1 x English User Manual

Caraterísticas - Processador: AMD Socket AM4, support for: AMD Ryzen™ 5000 Series / 3rd Generation AMD Ryzen™ processors / 3rd Generation AMD Ryzen™ with Radeon™ Graphics - Chipset: AMD B550 Memória RAM: - 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory - AMD Ryzen™ 5000 series processors: - Support for DDR4 5100(O.C.) / 5000(O.C.) / 4866(O.C.) / 4600(O.C.) / 4400(O.C.) / 4000(O.C.) / 3600(O.C.) / 3333(O.C.) /3200/2933/2667/2400/2133 MHz memory modules - 3rd Gen AMD Ryzen™ Processors: - Support for DDR4 5200(O.C.) / 5000(O.C.) / 4866(O.C.) / 4600(O.C.) / 4400(O.C.) / 4000(O.C.) / 3600(O.C.) / 3333(O.C.) /3200/2933/2667/2400/2133 MHz memory modules - 3rd Gen AMD Ryzen™ with Radeon™ Graphics processors: - Support for DDR4 5400(O.C.) / 5200(O.C.) / 5000(O.C.) / 4866(O.C.) / 4600(O.C.) / 4400(O.C.) / 4000(O.C.) / 3600(O.C.) / 3333(O.C.) /3200/2933/2667/2400/2133 MHz memory modules - Dual channel memory architecture - Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules - Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules - Support for Extreme Memory Profile (XMP) memory modules Áudio: - Realtek® ALC1220-VB codec - Support for DTS:X® Ultra - High Definition Audio - 2/4/5.1/7.1-channel - Support for S/PDIF Out LAN: - Intel® 2.5GbE LAN chip (2.5 Gbit/1000 Mbit/100 Mbit) (LAN1) - Realtek® 2.5GbE LAN chip (2.5 Gbit/1000 Mbit/100 Mbit) (LAN2) Comunicações wireless: - Intel® Wi-Fi 6 AX200 - WIFI a, b, g, n, ac with wave 2 features, ax, supporting 2.4/5 GHz Dual-Band - BLUETOOTH 5 - Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate Slots de Expansão: - 1 x PCI Express x16 slot (PCIEX16), integrated in the CPU: - 3rd Generation AMD Ryzen™ processors support PCIe 4.0 x16 mode - 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors support PCIe 3.0 x16 mode - For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. - 1 x PCI Express x16 slot (PCIEX8), integrated in the CPU: - 3rd Generation AMD Ryzen™ processors support PCIe 4.0 x8 mode - 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors support PCIe 3.0 x8 mode - The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot operates at up to x8 mode. - 1 x PCI Express x16 slot (PCIEX4), integrated in the Chipset: - Supporting PCIe 3.0 x4 mode - Suporte Multi-GPU: Suporta AMD Quad-GPU CrossFire™ e 2-Way AMD CrossFire™ Armazenamento: - 1 x M.2 connector (M2A_CPU), integrated in the CPU, supporting Socket 3, M key, type 2242/2260/2280/22110 SSDs: - 3rd Generation AMD Ryzen™ processors support SATA and PCIe 4.0 x4/x2 SSDs - 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors support SATA and PCIe 3.0 x4/x2 SSDs - 1 x M.2 connector (M2B_SB), integrated in the Chipset, supporting Socket 3, M key, type 2242/2260/2280/22110 SSDs: - Supporting SATA and PCIe 3.0 x4/x2 SSDs - 4 x SATA 6Gb/s connectors, integrated in the Chipset: - Support for RAID 0, RAID 1, and RAID 10 USB: - Integrated in the CPU: - 3 x USB 3.2 Gen 1 ports on the back panel - 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel - Chipset+Intel® Thunderbolt™ 3 Controller: - 2 x USB Type-C™ ports on the back panel, with USB 3.2 Gen 2 support - Chipset: - 1 x USB Type-C™ port with USB 3.2 Gen 1 support, available through the internal USB header - 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel - 2 x USB 3.2 Gen 1 ports available through the internal USB header - 1 x USB 2.0/1.1 port on the back panel - Chipset+2 USB 2.0 Hubs: - 5 x USB 2.0/1.1 ports (1 port on the back panel, 4 ports available through the internal USB headers) Portas I/O Painel Traseiro: - 1 x PS/2 keyboard/mouse port - 1 x DisplayPort In port - 1 x HDMI port - 2 x SMA antenna connectors (2T2R) - 2 x USB 3.2 Gen 2 Type-A ports (red) - 2 x Thunderbolt™ 3 connectors (USB Type-C™ port, with USB 3.2 Gen 2 support) - 3 x USB 3.2 Gen 1 ports - 2 x USB 2.0/1.1 ports - 2 x RJ-45 ports - 1 x optical S/PDIF Out connector - 5 x audio jacks - Dimensões: Formato ATX, 30.5cm x 24.4cm