Sma 44

Table 1. Product Specifications Description Specification Standards • IEEE 802.11n, 802.11g, 802.11b, • 802.3, 802.3u • 802.1X (security authentication) • 802.1Q (VLAN) • 802.11i (Wi-Fi Protected Access [WPA2] security) • 802.11e (wireless quality of service [QoS]) • IPv4 (RFC 791), IPv6 (RFC 2460) • Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723) Network protocols • Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent • Static IP • Point-to-Point Protocol over Ethernet (PPPoE) • Point-to-Point Tunneling Protocol (PPTP) • Layer 2 Tunneling Protocol (L2TP) • Spanning Tree Protocol (STP) • Dynamic DNS (DDNS) (DynDNS, TZO) Routing protocols • Static • RIP v1, v2 NAT protocol • Port Address Translation (PAT) • Network Address Port Translation (NAPT), NAT traversal, one-to-one NAT • Session Initiation Protocol Application Layer Gateway (SIP ALG) IPv6 • Dual-stack IPv4 and IPv6 • 6-to-4 • Stateless address auto-configuration • DHCP v6 • Internet Control Message Protocol (ICMP) v6 Network edge (DMZ) Software configurable on any IP address VLAN support Port-based and 802.1q tag-based VLANs, inter-VLAN routing Number of VLANs 16 active VLANs (1-4096 range) Security Firewall Stateful packet inspection (SPI) firewall, firewall rules Access control MAC-based access control, IP/MAC binding, wireless profiles Content filtering Static URL blocking, keyword blocking, approved URL Secure management HTTPS, username/password, X.509 v3 certificates 802.1x supplicant Port-based RADIUS authentication (Extensible Authentication Protocol [EAP] MD5, Protected EAP [PEAP]) Certificates X.509 v3 certificates, certificate upload using PEM format VPN IPsec 25 IPsec site-to-site tunnels QuickVPN 25 QuickVPN tunnels for remote client access SSL VPN 5 SSL VPN tunnels SSL VPN platforms Microsoft Windows 2000/XP/Vista 32 and 64-bit/Windows 7; Mac OSX 10.4+ PPTP 10 PPTP tunnels for remote access Encryption Data Encryption Standard (DES), Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption (128, 192, 256-bit) Authentication MD5/SHA1 authentication VPN pass-through PPTP, L2TP, IPsec Advanced VPN Dead Peer Detection (DPD), IPsec NAT traversal, Group VPN Quality of Service Prioritization types 802.1p port-based priority on LAN port, application-based priority on WAN port Queues 4 queues Performance NAT throughput 800 Mbps Concurrent sessions 6000 IPsec VPN throughput (3DES / AES) 90 Mbps SSL VPN throughput 25 Mbps Configuration Web user interface Simple browser-based device manager (HTTP/HTTPS) Management Management protocols Web browser, Simple Network Management Protocol (SNMP) version 1, 2c, 3, Bonjour, Universal Plug and Play (UPnP), Simple Network Time Protocol (SNTP) Event logging Local, syslog, email alerts, packet captures Upgradability Firmware upgradable through web browser, imported/exported configuration in text format Wireless LAN Specification Table 2 lists the wireless specifications for the Cisco RV220W. Table 2. Wireless Specifications Description Specification Product Dimensions (W x H x D) 8.66" x 1.54" x 6.69" 220 mm x 39 mm x 170 mm Ports 1 x 10/100/1000 Mbps Gigabit Ethernet WAN 4 x 10/100/1000 Mbps Gigabit Ethernet LAN Power Spec/modulation • 802.11 b/g/a/n • Binary phase-shift keying (BPSK) • Quadrature phase-shift keying (QPSK), • Quadrature amplitude modulation (QAM): 16-QAM, 64-QAM Channels FCC: • 2.4 GHz: channels 1-11 • 5.15 - 5.25 GHz: channels 36, 40, 44, 48 • 5.725 - 5.825 GHz: channels 149, 153, 157, 161, 165 Channel selection Auto channel selection External antennas Two detachable antennae with reverse SMA connectors Internal antenna One fixed internal antenna Antenna gain in dBi Two omni-directional antennae with maximum 2 dBi gain One directional internal antenna with maximum 6.6 dBi gain Transmit power • 802.11b: 17.5 dBm +/- 1.5 dBm • 802.11g: 17.5 dBm +/- 1.5 dBm • 802.11a: 13.5 dBm +/- 1.5 dBm • 802.11n: 13.5 dBm +/- 1.5 dBm Receiver sensitivity • 802.11b: -90 dBm 11 Mbps • 802.11g: -74 dBm 54 Mbps • 802.11a: -71 dBm 54 Mbps • 802.11n: -66 dBm 270 Mbps (2.4 GHz) • 802.11n: -63 dBm 270 Mbps (5 GHz) Multiple SSIDs Supports multiple SSIDs, up to 4 separate virtual networks with separate wireless profiles Wireless VLAN map Supports SSID to VLAN mapping with wireless client isolation WMM Wireless multimedia with QoS (802.1e) U-APSD Wi-Fi Multimedia (WMM) power save Wireless Distribution System (WDS) Allows wireless signals to be repeated by up to 4 compatible repeaters System Specifications Table 3 lists the system specifications for the Cisco RV220W. Table 3. System Specifications Description Specification Power 12V 1A Certification FCC class B, IC Operating temperature 0º to 40ºC (32º to 104ºF) Storage temperature -20º to 70ºC (-4º to 158ºF) Operating humidity 10% to 85% noncondensing Storage humidity 5% to 90% noncondensing