Wireless isolation clients

Segurança Wireless Security: Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK Funcionalidades de gestão     Auranet Controller Software Email Alerts LED ON/OFF Control Management MAC Access Control SNMP System Logging Local/Remote Syslog Telnet Web-based Management: HTTP/HTTPS L3 Management Multi-site Management

Segurança Wireless Security: Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK Funcionalidades de gestão EAP Controller Software Email Alerts LED ON/OFF Control Management MAC Access Control SNMP System Logging Local/Remote Syslog Telnet Web-based Management: HTTP/HTTPS L3 Management Multi-site Management 

Seguran/xc3/xa7a Wireless Security: Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK Funcionalidades de gest/xc3/xa3o /xc2/xa0/xc2/xa0/xc2/xa0 Auranet Controller Software Email Alerts LED ON/OFF Control Management MAC Access Control SNMP System Logging Local/Remote Syslog Telnet Web-based Management: HTTP/HTTPS L3 Management Multi-site Management /n

Seguran/xc3/xa7a Wireless Security: Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK Funcionalidades de gest/xc3/xa3o EAP Controller Software Email Alerts LED ON/OFF Control Management MAC Access Control SNMP System Logging Local/Remote Syslog Telnet Web-based Management: HTTP/HTTPS L3 Management Multi-site Management/xc2/xa0

Ponto de acesso exterior TP-Link EAP110-Outdoor. Cracterísticas principais:. Proteção IP65 para infraestruturas de rede Wi-Fi no exterior.. Até 300Mbps com tecnologia MIMO 2×2.. Antenas de alto debito de transmissão e alto ganho fornecem uma área abrangente e de longo alcance.. O software de gestão gratuito EAP Omada Controller permite que os administradores gerir facilmente centenas de EAPs.. Portal cativo fornece um método dinâmico para autenticação de convidados nos mercados hoteleiro, centros hospitalares e empresariais, assim como na restauração.. O Facebook Wi-Fi e o SMS ajudam a impulsionar seus negócios.. Fonte de alimentação passiva (adaptador PoE incluído) permite uma implementação flexível de acordo com os projetos.    Características Principais Tipo de Produto Ponto de acesso Wi-Fi Ligações 1 x Rede LAN RJ45 / Wi-Fi Padrões Wi-Fi IEEE 802.11b / IEEE 802.11g / IEEE 802.11n Antena 2 antenas 3 dBi Velocidade Rede LAN 10/100 Mbps Velocidade WiFi Até 300 Mbps Conectividade Ligações 1 x Rede LAN RJ45 / Wi-Fi Nº de portas de rede 1 Características Técnicas Frequência 2.4 GHz Velocidade Rede LAN 10/100 Mbps Velocidade WiFi Até 300 Mbps Botões de controlo Reset Antena 2 antenas 3 dBi Funções wireless Multiple SSIDs（Up to 8 SSIDs） Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control （Adjust Transmit Power on dBm） QoS(WMM) Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client Relação de sinal 11n: Up to 300Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Potência de transmissão CE： ≤20dBm (EIRP) FCC: ≤22dBm Gestão Auranet Controller Software Email Alerts LED ON/OFF Control Gestão de controlo de acessos MAC SNMP System Logging Local/Remote Syslog Telnet Gestão via Web: HTTP/HTTPS Gestão L3 Gestão Multi-site Gestão de VLAN Ligações Padrões Wi-Fi IEEE 802.11b / IEEE 802.11g / IEEE 802.11n Antena 2 antenas 3 dBi Segurança Encriptação Wi-Fi Captive Portal Authentication Access Control / Wireless Mac Address Filtering / Wireless Isolation Between Clients / SSID to VLAN Mapping / Rogue AP Detection / 802.1X Support / 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK Características Gerais Cor Branco Dimensões (LxAxP) 4,6 x 21,6 x 2,7 cm

Características Detalhadas Avaliações de clientes Resumo Descrição Características Detalhadas Avaliações de clientes 54.90 Comprar Descrição Ponto de acesso exterior TP-Link EAP110-Outdoor. Cracterísticas principais:. Proteção IP65 para infraestruturas de rede Wi-Fi no exterior.. Até 300Mbps com tecnologia MIMO 2×2.. Antenas de alto debito de transmissão e alto ganho fornecem uma área abrangente e de longo alcance.. O software de gestão gratuito EAP Omada Controller permite que os administradores gerir facilmente centenas de EAPs.. Portal cativo fornece um método dinâmico para autenticação de convidados nos mercados hoteleiro, centros hospitalares e empresariais, assim como na restauração.. O Facebook Wi-Fi e o SMS ajudam a impulsionar seus negócios.. Fonte de alimentação passiva (adaptador PoE incluído) permite uma implementação flexível de acordo com os projetos.    Características Principais Tipo de Produto Ponto de acesso Wi-Fi Ligações 1 x Rede LAN RJ45 / Wi-Fi Padrões Wi-Fi IEEE 802.11b / IEEE 802.11g / IEEE 802.11n Antena 2 antenas 3 dBi Velocidade Rede LAN 10/100 Mbps Velocidade WiFi Até 300 Mbps Conectividade Ligações 1 x Rede LAN RJ45 / Wi-Fi Nº de portas de rede 1 Características Técnicas Frequência 2.4 GHz Velocidade Rede LAN 10/100 Mbps Velocidade WiFi Até 300 Mbps Botões de controlo Reset Antena 2 antenas 3 dBi Funções wireless Multiple SSIDs（Up to 8 SSIDs） Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control （Adjust Transmit Power on dBm） QoS(WMM) Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client Relação de sinal 11n: Up to 300Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Potência de transmissão CE： ≤20dBm (EIRP) FCC: ≤22dBm Gestão Auranet Controller Software Email Alerts LED ON/OFF Control Gestão de controlo de acessos MAC SNMP System Logging Local/Remote Syslog Telnet Gestão via Web: HTTP/HTTPS Gestão L3 Gestão Multi-site Gestão de VLAN Ligações Padrões Wi-Fi IEEE 802.11b / IEEE 802.11g / IEEE 802.11n Antena 2 antenas 3 dBi Segurança Encriptação Wi-Fi Captive Portal Authentication Access Control / Wireless Mac Address Filtering / Wireless Isolation Between Clients / SSID to VLAN Mapping / Rogue AP Detection / 802.1X Support / 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK Características Gerais Cor Branco Dimensões (LxAxP) 4,6 x 21,6 x 2,7 cm

Access Point Model: SMC2891W-AG Novo Tenho cabo de para ligar a rede SMC Master Wireless Access Point/Bridge - PoE kit included SMC Master Wireless Access Point/Bridge - PoE kit included Overview The EliteConnect™ 802.11a/g Wireless Outdoor Access Point/Bridge is designed to bridge two or more wired LAN’s (usually located in different buildings), while simultaneously providing wireless access to local or mobile users. The SMC2890W-AG/SMC2891W-AG incorporates a dual radio architecture to bridge over one wireless band and provide wireless client access over the other band. The Dual-Band Outdoor Access Point/Bridge is completely weatherproof and capable of being installed in a wide variety of different environments. It comes in two models, SMC2890W-AG and SMC2891W-AG, the latter with built-in 17dBi 5GHz antenna and uses Wireless Distribution System (WDS) to allow bridging between remote locations. Up to 6 WDS Bridge links are supported to remote LAN’s and branch locations. Using dual radio architecture allows for different bridging options using either the 802.11a or 802.11b/g wireless band. As an alternative if the bridging functionality is not required you can use both 802.11a and 802.11b/g in access point mode. Security is the main concern for customers regarding enterprise wireless networking. The EliteConnect' Universal 2.4GHz/5Ghz Outdoor Access Point/Bridge provides enterprise level advanced authentication and encryption security features. Security features include 64/128/152-bit WEP, or 128-bit Advanced Encryption Standard (AES), Wi-Fi Protected Access (WPA/WPA2) and authentication using 802.1x. SMC2890W-AG / SMC2891W-AG also supports disable SSID Broadcast, Client Isolation, and MAC filtering. SMC2890W-AG / SMC2891W-AG allows easy management options through HTTP, SNMP, and Telnet. Web based network management tools make configuration and remote management of the network simple. SNMP allows for easy integration into your existing wired network and management infrastructure. Telnet uses command line interface for local or remote management. Other management features include Syslog and local Event Logging. The Dual-Band Outdoor Bridge comes with available antenna connections to add optional SMC high gain antennas to extend your wireless coverage and range. The SMC2890W-AG has the option for both 802.11a and 802.11g high gain antenna options. The SMC2891W-AG has a 17dBi built-in 802.11a flat panel antenna and optional 802.11g antenna. SMC's line of high gain antennas offers the flexibility and reliability that customers require. Other key Enterprise level features include Spanning-Tree support anda RSSI (Received Signal Strength Indicator). Spanning Tree can be used to detect and prevent network loops in your Wireless LAN. This ensures only one route exists between any two points on a network and can allow for Redundancy in case one link goes down. RSSI is built into the web interface allowing a user to view the Signal to Noise ratio between two bridge links, thus enabling better antenna alignment and link monitoring. Specifications Network Configuration • Bridge Mode: Point-to-Point, Point-to-Multipoint, Wireless Distribution System (WDS) • Access Point Mode: Infrastructure Mode Maximum Clients • 128 in Access Point Mode (64 per radio interface) Physical Ports • SMC2890W-AG • 1-port 10/100Mbps Fast Ethernet with support for Power over Ethernet (PoE) • 1-port Management Console • 2x N-type antenna connector, 2.4GHz for 802.11b/g • 2x N-type antenna connector, 5GHz for 802.11a • SMC2891W-AG • 1-port 10/100Mbps Fast Ethernet with support for Power over Ethernet (PoE) • 1-port Management Console • 2x N-type antenna connector, 2.4GHz for 802.11b/g • 1x N-type antenna connector, 5GHz for 802.11a LED Indicators • PWR (Power), Link (Ethernet Link/Activity), 11a and 11g (Wireless Link/Activity) • Built-in RSSI Meter (Receive Signal Strength Indicator) Additional Package Content • 98 ft/ 30 m LAN/PoE cable with RJ-45 and special outdoor connector • 5.9 ft/ 1.8 m console cable with RS-232 and special outdoor connector

Table 1. Product Specifications Description Specification Standards • IEEE 802.11n, 802.11g, 802.11b, • 802.3, 802.3u • 802.1X (security authentication) • 802.1Q (VLAN) • 802.11i (Wi-Fi Protected Access [WPA2] security) • 802.11e (wireless quality of service [QoS]) • IPv4 (RFC 791), IPv6 (RFC 2460) • Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723) Network protocols • Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent • Static IP • Point-to-Point Protocol over Ethernet (PPPoE) • Point-to-Point Tunneling Protocol (PPTP) • Layer 2 Tunneling Protocol (L2TP) • Spanning Tree Protocol (STP) • Dynamic DNS (DDNS) (DynDNS, TZO) Routing protocols • Static • RIP v1, v2 NAT protocol • Port Address Translation (PAT) • Network Address Port Translation (NAPT), NAT traversal, one-to-one NAT • Session Initiation Protocol Application Layer Gateway (SIP ALG) IPv6 • Dual-stack IPv4 and IPv6 • 6-to-4 • Stateless address auto-configuration • DHCP v6 • Internet Control Message Protocol (ICMP) v6 Network edge (DMZ) Software configurable on any IP address VLAN support Port-based and 802.1q tag-based VLANs, inter-VLAN routing Number of VLANs 16 active VLANs (1-4096 range) Security Firewall Stateful packet inspection (SPI) firewall, firewall rules Access control MAC-based access control, IP/MAC binding, wireless profiles Content filtering Static URL blocking, keyword blocking, approved URL Secure management HTTPS, username/password, X.509 v3 certificates 802.1x supplicant Port-based RADIUS authentication (Extensible Authentication Protocol [EAP] MD5, Protected EAP [PEAP]) Certificates X.509 v3 certificates, certificate upload using PEM format VPN IPsec 25 IPsec site-to-site tunnels QuickVPN 25 QuickVPN tunnels for remote client access SSL VPN 5 SSL VPN tunnels SSL VPN platforms Microsoft Windows 2000/XP/Vista 32 and 64-bit/Windows 7; Mac OSX 10.4+ PPTP 10 PPTP tunnels for remote access Encryption Data Encryption Standard (DES), Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption (128, 192, 256-bit) Authentication MD5/SHA1 authentication VPN pass-through PPTP, L2TP, IPsec Advanced VPN Dead Peer Detection (DPD), IPsec NAT traversal, Group VPN Quality of Service Prioritization types 802.1p port-based priority on LAN port, application-based priority on WAN port Queues 4 queues Performance NAT throughput 800 Mbps Concurrent sessions 6000 IPsec VPN throughput (3DES / AES) 90 Mbps SSL VPN throughput 25 Mbps Configuration Web user interface Simple browser-based device manager (HTTP/HTTPS) Management Management protocols Web browser, Simple Network Management Protocol (SNMP) version 1, 2c, 3, Bonjour, Universal Plug and Play (UPnP), Simple Network Time Protocol (SNTP) Event logging Local, syslog, email alerts, packet captures Upgradability Firmware upgradable through web browser, imported/exported configuration in text format Wireless LAN Specification Table 2 lists the wireless specifications for the Cisco RV220W. Table 2. Wireless Specifications Description Specification Product Dimensions (W x H x D) 8.66" x 1.54" x 6.69" 220 mm x 39 mm x 170 mm Ports 1 x 10/100/1000 Mbps Gigabit Ethernet WAN 4 x 10/100/1000 Mbps Gigabit Ethernet LAN Power Spec/modulation • 802.11 b/g/a/n • Binary phase-shift keying (BPSK) • Quadrature phase-shift keying (QPSK), • Quadrature amplitude modulation (QAM): 16-QAM, 64-QAM Channels FCC: • 2.4 GHz: channels 1-11 • 5.15 - 5.25 GHz: channels 36, 40, 44, 48 • 5.725 - 5.825 GHz: channels 149, 153, 157, 161, 165 Channel selection Auto channel selection External antennas Two detachable antennae with reverse SMA connectors Internal antenna One fixed internal antenna Antenna gain in dBi Two omni-directional antennae with maximum 2 dBi gain One directional internal antenna with maximum 6.6 dBi gain Transmit power • 802.11b: 17.5 dBm +/- 1.5 dBm • 802.11g: 17.5 dBm +/- 1.5 dBm • 802.11a: 13.5 dBm +/- 1.5 dBm • 802.11n: 13.5 dBm +/- 1.5 dBm Receiver sensitivity • 802.11b: -90 dBm 11 Mbps • 802.11g: -74 dBm 54 Mbps • 802.11a: -71 dBm 54 Mbps • 802.11n: -66 dBm 270 Mbps (2.4 GHz) • 802.11n: -63 dBm 270 Mbps (5 GHz) Multiple SSIDs Supports multiple SSIDs, up to 4 separate virtual networks with separate wireless profiles Wireless VLAN map Supports SSID to VLAN mapping with wireless client isolation WMM Wireless multimedia with QoS (802.1e) U-APSD Wi-Fi Multimedia (WMM) power save Wireless Distribution System (WDS) Allows wireless signals to be repeated by up to 4 compatible repeaters System Specifications Table 3 lists the system specifications for the Cisco RV220W. Table 3. System Specifications Description Specification Power 12V 1A Certification FCC class B, IC Operating temperature 0º to 40ºC (32º to 104ºF) Storage temperature -20º to 70ºC (-4º to 158ºF) Operating humidity 10% to 85% noncondensing Storage humidity 5% to 90% noncondensing

Novo. Ainda selado Product overview Ideal for small and medium-sized networks, the Cisco® Aironet® 1830 Series delivers industry-leading wireless performance with support for the latest Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing requirements of wireless networks by delivering a better user experience. The 1830 Series extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support. Features and benefits With 802.11ac Wave 2, the 1830 Series provides a data rate of up to 867 Mbps on the 5-GHz radio, exceeding the data rates offered by today’s high-end 802.11n access points. It also enables a total aggregate dual-radio data rate of up to 1 Gbps, providing the necessary foundation for enterprise and service provider networks to stay ahead of the performance and bandwidth expectations and needs of their wireless users. Due to its convenience, wireless access is increasingly the preferred form of network connectivity for corporate users. Along with this shift, there is an expectation that wireless should not slow down users’ day-to-day work, but should enable a high-performance experience while allowing users to move freely. The 1830 Series delivers industry-leading performance for highly secure and reliable wireless connections and provides a robust mobility experience that includes:

Praticamente novo. Specs: VigorAP 902 Managed PoE Wireless AP Managed 802.11ac Business-class Wireless Access Point Business-class wireless access point 802.11ac (866mbps) & 802.11n (300mbps) Simultaneous dual-band (2.4/5Ghz) Support for 5Ghz Extended Channels (100-140) Gigabit Ethernet Switch (4+1 Ports) Centrally managed or standalone operation Central Management supports mobility, load-balancing, monitoring, status, upgrade and configuration Local temperature monitoring/logging (Optional thermometer accessory required) Can be powered by supplied PSU or standard 802.3af PoE (Power-over-Ethernet) WPA2 Wireless Encryption Repeater/Bridge/Access Point & WDS Time-Scheduled Operation Bandwidth management per SSID 802.1q VLAN Tagging Client Isolation & Multiple SSIDs MAC Address Filtering Radius / WPA & 802.1x User Authentication Built-in Site Surveyor Wall Mountable